H05RN-F is a flexible rubber cable for electrical appliances and light equipment connections where mechanical strain is low. Fine-stranded copper conductors are insulated with EI4 rubber and enclosed by an EM2 polychloroprene sheath. Its rated voltage is 300/500V. Typical uses include household and office equipment connections in dry or damp locations, with the cable route protected from crushing, sharp edges and excessive pulling.
- Fine bare copper strands
- Strands to VDE-0295 Class-5, IEC 60228 Class-5
- Rubber core insulation EI4 to VDE-0282 Part-1
- Color code VDE-0293-308
- Green-yellow grounding, 3 conductors and above
- Polychloroprene rubber (neoprene) jacket EM2
- Working voltage: 300/500 volts
- Test voltage: 2000 volts
- Flexing bending radius: 7.5 x Ø
- Fixed bending radius: 4.0 x Ø
- Temperature Range: -30º C to +60º C
- Short circuit temperature: +200 º C
- Flame retardant: IEC 60332.1
- Insulation resistance: 20 MΩ x km
Class 5 bare copper conductors for flexible connections.
EI4 rubber core insulation and an EM2 polychloroprene outer sheath.
Green/yellow protective conductor specified for constructions with three or more conductors.
Select the core count and conductor area for the appliance, protective conductor requirement and termination arrangement. Allow room for the listed bend radii at the cable entry and provide suitable strain relief. For wet or outdoor locations, agree the exposure conditions and connection protection with the equipment specification before ordering.
What is the rated voltage of H05RN-F?
The working voltage listed for this cable is 300/500V.
Which materials form the insulation and sheath?
EI4 rubber insulates the conductors; EM2 polychloroprene rubber forms the outer sheath.
What bending space should the installation allow?
The listed minimum radii are 7.5 times the overall diameter during flexing and 4 times the diameter when fixed.
Is it intended for heavy mechanical loading?
The application is light equipment service under low mechanical strain. Specify a cable designed for the actual load where pulling, impact or repeated heavy movement is expected.
Which details are needed for an enquiry?
Provide core count, conductor area, length, appliance type, route conditions and the required protective conductor arrangement.
