600/1000V single core XLPE insulated
LSZH sheathed armoured cable is designed
for fixed low voltage power distribution.
It is suitable for industrial plants,
commercial buildings, public buildings,
transport systems and infrastructure projects.
The XLPE insulation provides reliable
electrical performance and thermal stability.
The LSZH sheath helps reduce smoke emission
and corrosive gas release in the event of fire.
The armoured construction provides improved
mechanical protection.
It is suitable for cable ducts,
underground cable routes, cable trenches
and protected outdoor installation.
For single core armoured cable,
the armour type should be selected
according to project requirements.
The cable should be selected according to
voltage rating, conductor size,
conductor material, armour type,
fire performance requirement
and project specification.
Basic design to IEC 60502-1
| Flame Retardance (Single vertical wire or cable test) | IEC 60332-1-2; EN 60332-1-2 |
| Reduced Fire Propagation (Vertically-mounted bundled wires & cables test) | IEC 60332-3-24; EN 60332-3-24 |
| Halogen Free | IEC 60754-1; EN 50267-2-1 |
| No Corrosive Gas Emission | IEC 60754-2; EN 50267-2-2 |
| Minimum Smoke Emission | IEC 61034-2; EN 61034-2 |
600/1000V
Conductor : The conductors shall be class 2 plain or metal-coated annealed copper in accordance with IEC 60228. Class 1 and class 5 conductor can be offered as option.
Insulation : Thermosetting XLPE compound as per IEC 60502-1.
Inner Covering Option : Thermoplastic halogen free compound ST8 as per IEC 60502-1.
Armouring : Aluminium wire.
Outer Sheath : Thermoplastic halogen free compound ST8 as per IEC 60502-1.
Outer Sheath Option : UV resistance, hydrocarbon resistance, oil resistance, anti-rodent and anti-termite properties can be offered as option.
Insulation Colour : Brown or blue; other colours can be offered upon request.
Sheath Colour : Black; other colours can be offered upon request.
Maximum temperature range during operation : 90°C
Maximum short circuit temperature (5 Seconds) : 250°C
Minimum bending radius : 6 × Overall Diameter
| Conductor | FLP600-RZ1MAZ1-R | ||||||
|---|---|---|---|---|---|---|---|
| No. of Cores × Cross-sectional Area | Conductor Class | Nominal Insulation Thickness | Nominal Inner Covering Thickness | Nominal AL Wire Diameter | Nominal Sheath Thickness | Approx. Overall Diameter | Approx. Weight |
| No.×mm² | mm | mm | mm | mm | mm | kg/km | |
| 1×4 | 2 | 0.7 | 1.0 | 0.8 | 1.8 | 11.2 | 200 |
| 1×6 | 2 | 0.7 | 1.0 | 0.8 | 1.8 | 11.7 | 233 |
| 1×10 | 2 | 0.7 | 1.0 | 0.8 | 1.8 | 12.7 | 294 |
| 1×16 | 2 | 0.7 | 1.0 | 0.8 | 1.8 | 13.7 | 377 |
| 1×25 | 2 | 0.9 | 1.0 | 0.8 | 1.8 | 15.4 | 513 |
| 1×35 | 2 | 0.9 | 1.0 | 1.25 | 1.8 | 17.5 | 688 |
| 1×50 | 2 | 1.0 | 1.0 | 1.25 | 1.8 | 19.0 | 856 |
| 1×70 | 2 | 1.1 | 1.0 | 1.25 | 1.8 | 21.0 | 1124 |
| 1×95 | 2 | 1.1 | 1.0 | 1.6 | 1.8 | 24.0 | 1521 |
| 1×120 | 2 | 1.2 | 1.0 | 1.6 | 1.8 | 25.8 | 1831 |
| 1×150 | 2 | 1.4 | 1.0 | 1.6 | 1.8 | 27.8 | 2176 |
| 1×185 | 2 | 1.6 | 1.0 | 1.6 | 1.8 | 30.4 | 2668 |
| 1×240 | 2 | 1.7 | 1.0 | 1.6 | 1.9 | 33.5 | 3367 |
| 1×300 | 2 | 1.8 | 1.0 | 2.0 | 2.0 | 37.5 | 4241 |
| 1×400 | 2 | 2.0 | 1.2 | 2.0 | 2.2 | 41.3 | 5283 |
| 1×500 | 2 | 2.2 | 1.2 | 2.0 | 2.3 | 45.4 | 6535 |
Conductor operating temperature : 90°C
Ambient temperature : 30°C
| Conductor cross-sectional area | Ref. Method C (clipped direct) | Ref. Method F (in free air or on a perforated cable tray, horizontal or vertical) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Touching | Touching | Spaced by on cable diameter | |||||||||
| 2 cables, single-phase a.c. or d.c. flat | 3 or 4 cables, three-phase a.c. flat | 2 cables, single-phase a.c. or d.c. flat | 3 or 4 cables, three-phase a.c. flat | 3 cables three-phase a.c. trefoil | 2 cables, d.c. | 2 cables, single-phase a.c. | 3 or 4 cables, three-phase a.c. | ||||
| Horizontal | Vertical | Horizontal | Vertical | Horizontal | Vertical | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| mm² | A | A | A | A | A | A | A | A | A | A | A |
| 50 | 237 | 220 | 253 | 232 | 222 | 284 | 270 | 282 | 266 | 288 | 266 |
| 70 | 303 | 277 | 322 | 293 | 285 | 356 | 349 | 357 | 337 | 358 | 331 |
| 95 | 367 | 333 | 389 | 352 | 346 | 446 | 426 | 436 | 412 | 425 | 393 |
| 120 | 425 | 383 | 449 | 405 | 402 | 519 | 497 | 504 | 477 | 485 | 449 |
| 150 | 488 | 437 | 516 | 462 | 463 | 600 | 575 | 566 | 539 | 549 | 510 |
| 185 | 557 | 496 | 587 | 524 | 529 | 688 | 660 | 643 | 614 | 618 | 574 |
| 240 | 656 | 579 | 689 | 612 | 625 | 815 | 782 | 749 | 714 | 715 | 666 |
| 300 | 755 | 662 | 792 | 700 | 720 | 943 | 906 | 842 | 805 | 810 | 755 |
| 400 | 853 | 717 | 899 | 767 | 815 | 1137 | 1094 | 929 | 889 | 848 | 797 |
| 500 | 962 | 791 | 1016 | 851 | 918 | 1314 | 1266 | 1032 | 989 | 923 | 871 |
| Conductor cross-sectional area | 2 cables d.c. | Ref. Methods C&F (clipped direct, on trays or in free air) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 cables, single-phase a.c. | 3 or 4 cables, three-phase a.c. | |||||||||||||||
| Touching | Spaced* | Trefoil and touching | Flat and touching | Flat and spaced* | ||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | ||||||||||
| mm² | mV/A/m | mV/A/m | mV/A/m | mV/A/m | mV/A/m | mV/A/m | ||||||||||
| r | x | z | r | x | z | r | x | z | r | x | z | r | x | z | ||
| 50 | 0.98 | 0.99 | 0.21 | 1.00 | 0.98 | 0.29 | 1.00 | 0.86 | 0.180 | 0.87 | 0.84 | 0.25 | 0.88 | 0.84 | 0.33 | 0.90 |
| 70 | 0.67 | 0.68 | 0.20 | 0.71 | 0.69 | 0.29 | 0.75 | 0.59 | 0.170 | 0.62 | 0.60 | 0.25 | 0.65 | 0.62 | 0.32 | 0.70 |
| 95 | 0.49 | 0.51 | 0.195 | 0.55 | 0.53 | 0.28 | 0.60 | 0.44 | 0.170 | 0.47 | 0.46 | 0.24 | 0.52 | 0.49 | 0.31 | 0.58 |
| 120 | 0.39 | 0.41 | 0.190 | 0.45 | 0.43 | 0.27 | 0.51 | 0.35 | 0.165 | 0.39 | 0.38 | 0.34 | 0.44 | 0.41 | 0.30 | 0.51 |
| 150 | 0.31 | 0.33 | 0.185 | 0.38 | 0.36 | 0.27 | 0.45 | 0.29 | 0.160 | 0.33 | 0.31 | 0.23 | 0.39 | 0.34 | 0.39 | 0.45 |
| 185 | 0.25 | 0.27 | 0.185 | 0.33 | 0.30 | 0.26 | 0.40 | 0.23 | 0.160 | 0.28 | 0.26 | 0.23 | 0.34 | 0.29 | 0.29 | 0.41 |
| 240 | 0.195 | 0.21 | 0.180 | 0.28 | 0.24 | 0.26 | 0.35 | 0.180 | 0.155 | 0.24 | 0.21 | 0.22 | 0.30 | 0.24 | 0.28 | 0.37 |
| 300 | 0.155 | 0.17 | 0.175 | 0.25 | 0.195 | 0.25 | 0.32 | 0.145 | 0.150 | 0.21 | 0.170 | 0.22 | 0.28 | 0.20 | 0.27 | 0.34 |
| 400 | 0.115 | 0.145 | 0.170 | 0.22 | 0.180 | 0.24 | 0.30 | 0.125 | 0.150 | 0.195 | 0.160 | 0.21 | 0.27 | 0.20 | 0.27 | 0.33 |
| 500 | 0.093 | 0.125 | 0.170 | 0.21 | 0.165 | 0.24 | 0.29 | 0.105 | 0.145 | 0.180 | 0.145 | 0.20 | 0.25 | 0.190 | 0.24 | 0.31 |
Note : *Spacings larger than one cable diameter will result in a large voltage drop.
r = conductor resistance at operating temperature
x = reactance
z = impedance
KEY FEATURES
- Manufactured according to IEC 60502-1 requirements
- 600/1000V voltage rating
- Single core power cable construction
- XLPE insulated conductor
- LSZH / LSOH outer sheath
- Armoured cable design
- Low smoke zero halogen sheath performance
- Suitable for fixed low voltage power distribution
- Suitable for underground and outdoor installation
- Suitable for public buildings and transport systems
- Provides improved mechanical protection
SELECTION NOTES
Before quotation, please confirm:
- Voltage rating
- Conductor size
- Conductor material
- Armour type
- Cable length
- Sheath colour
- Fire performance requirement
- Installation method
- Installation environment
- Required standard or project specification
- Packing requirement
- Destination port or delivery address
600/1000V single core XLPE LSZH armoured cable
is commonly selected for projects requiring
mechanical protection and LSZH performance.
It is suitable for underground cable routes,
transport systems, public buildings,
industrial plants and infrastructure projects.
RELATED CABLE TYPES
- IEC 60502 low voltage cable
- XLPE insulated LSZH sheathed cable
- Single core XLPE LSZH armoured cable
- Multi-core XLPE LSZH armoured cable
- XLPE LSZH unarmoured cable
- XLPE PVC armoured cable
- BS6724 LSZH armoured cable
- BS5467 armoured power cable
- 600/1000V power cable
- Low voltage power cable
FAQ
What is this cable used for?
It is used for fixed low voltage
power distribution.
It is suitable for public buildings,
transport systems, underground routes
and infrastructure projects.
What standard does this cable follow?
This cable is designed according to
IEC 60502-1 requirements.
Is this cable armoured?
Yes. This is an armoured cable.
The armour provides improved
mechanical protection.
What does LSZH mean?
LSZH means Low Smoke Zero Halogen.
The sheath helps reduce smoke emission
and corrosive gas release during fire.
Can this cable be used underground?
Yes. It can be used for underground
cable routes and cable trenches.
The final installation should follow
project specifications and local
installation requirements.
What is special for single core
armoured cable?
For single core armoured cable,
the armour type should be selected
according to project requirements.
Non-magnetic armour may be required
for some AC applications.
What information is required for quotation?
Please confirm voltage rating,
conductor size, conductor material,
armour type and cable length.
Fire performance requirement,
installation method and destination port
are also required.
Can BURYCABLE supply IEC 60502
single core XLPE LSZH armoured cable?
Yes. BURYCABLE can supply IEC 60502-1
single core XLPE insulated LSZH sheathed
armoured cables.
We can support different conductor sizes,
armour types, sheath colours,
lengths and packing requirements.
